Electric Bike Throttle Replacement - iFixit 수리 안내서

소개

Use this guide to replace your Electric Bike Throttle.

필요한 것

1 단계 Brake

Electric Bike Throttle Replacement, Brake: 1 단계, 이미지 1/1

Before starting to disassemble your electric bike, turn the power off.
Remove the 3/32 inch Allen screw.
When removing Allen screw, make sure the driver is well seated because they are simple to strip.

2 단계 Throttle

Electric Bike Throttle Replacement, Throttle: 2 단계, 이미지 1/1

Locate the throttle Allen screw.
Remove the 5/64 inch Allen screw.

3 단계 Throttle

Electric Bike Throttle Replacement, Throttle: 3 단계, 이미지 1/1

Slide the Throttle off.
When removing the throttle, be careful. Remove it slowly to avoid damaging the wire.

4 단계 Control Box

Electric Bike Throttle Replacement, Control Box: 4 단계, 이미지 1/1

Remove the following screws.
2 mm Philips screws.

5 단계

Electric Bike Throttle Replacement: 5 단계, 이미지 1/1

Open up the control box.

6 단계

Electric Bike Throttle Replacement: 6 단계, 이미지 1/1

Track the throttle wire.
To ensure you don't lose it, you should mark it.

7 단계

Electric Bike Throttle Replacement: 7 단계, 이미지 1/1

Locate the throttle wire.
Disconnect the throttle wire plug from the controller wire plug.
Take caution while handling these wires. You can easily damage them.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Ali Al-hamadani

회원 가입일: 10/06/22

145 평판

안내서 1개 작성함

댓글 0개

조회 통계:

24 시간 전: 2

7일 전: 14

30일 전: 72

전체 시간: 1,120