Enabot EBO SE Wheels Replacement

소개

We'll take you step-by-step through the process of changing the wheels on your Enabot EBO SE in this tutorial, along with helpful advice to ensure a seamless installation. Wheels are essential to its overall performance and mobility. To guarantee optimum performance, it can eventually become necessary to replace the wheels owing to frequent use or wear and tear.

필요한 것

1 단계 Wheel Assembly

Enabot EBO SE Wheels Replacement, Wheel Assembly: 1 단계, 이미지 1/1

Gently turn the robot upside down.
Place the robot on a stable surface to prevent it from rolling or falling.

번역하기

2 단계

Enabot EBO SE Wheels Replacement: 2 단계, 이미지 3/3

Use a flathead 2.5 mm screwdriver to remove the 5.7 mm screw from the wheels.
A tool should have been provided in the box for this purpose.

번역하기

3 단계

Pull the wheel assembly towards you so it comes straight off without resistance.
If there is resistance, make sure to apply gentle force when pulling as it can get damaged with too much force.

번역하기