Skip to main content

소개

Whether you broke a string or want a freshly bright sound for your guitar, this guide will teach you how to replace a string on your Epiphone Les Paul electric guitar. I will be using D'Addario Super Light Gauge strings.

부품

No parts specified.

  1. Loosen the first sting you would like to replace by turning the corresponding knob counter-clockwise.
    • Loosen the first sting you would like to replace by turning the corresponding knob counter-clockwise.

    • Do NOT loosen/remove all strings at once! The lack of tension will cause the neck of the guitar to bend, and the guitar will have trouble staying in tune.

  2. Pull string away from the rest of the strings and snip it with the wire cutters.
    • Pull string away from the rest of the strings and snip it with the wire cutters.

    • String may go flying and will be sharp. Be careful.

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Remove the cut string from the bridge of the guitar and its corresponding spoke.
    • Remove the cut string from the bridge of the guitar and its corresponding spoke.

  5. Lead new string through bridge and then spoke. Leave plenty of slack in the string. Strings will be color coded by the bead on the end of it, and the pack of strings will tell you which string goes where.
    • Lead new string through bridge and then spoke. Leave plenty of slack in the string.

    • Strings will be color coded by the bead on the end of it, and the pack of strings will tell you which string goes where.

  6. Use your right hand to hold the slack near the bridge, and use your left hand to tightly pull the string through the spoke while turning the knob with the fingers of your left hand. This may feel uncomfortable, and will also take the longest out of all the steps.
    • Use your right hand to hold the slack near the bridge, and use your left hand to tightly pull the string through the spoke while turning the knob with the fingers of your left hand.

    • This may feel uncomfortable, and will also take the longest out of all the steps.

  7. Once the string starts getting tight and your right hand is no longer needed to hold slack, start tuning the string to the note you want it at.
    • Once the string starts getting tight and your right hand is no longer needed to hold slack, start tuning the string to the note you want it at.

    • You can use a tuner or your ear. This site can prove to be helpful: How to Tune a Guitar

결론

Have fun playing with your new bright-sounding guitar.

다른 7명이 해당 안내서를 완성하였습니다.

Matthew Thomas

회원 가입일: 2015년 02월 24일

281 평판

안내서 1개 작성함

Cal Poly, Team 24-3, Green Winter 2015 Cal Poly, Team 24-3, Green Winter 2015 회원

CPSU-GREEN-W15S24G3

5 회원들

안내서 3개 작성하였습니다

Thank you very much. First time changing the strings to a guitar, unfortunately I'm a moron and broke the D String :\

Luigi - 답글

댓글 쓰기

조회 통계:

지난 24시간: 8

지난 7일: 55

지난 30일: 187

전체 시간: 6,899