Epson BrightLink 450Wi Air Filter Replacement - iFixit 수리 안내서

소개

The air filter is a very important part of the Epson Brightlink 450Wi. Although a small piece, it's absolutely vital to keep in good working condition. The air filter is important because it keeps your device clean and dust free.

When too much dust builds up it can cause the device to overheat, which can damage your device and cause malfunctions. In the event of a clogged air filter or when in need of replacement, follow this guide.

1 단계 Air Filter

Epson BrightLink 450Wi Air Filter Replacement, Air Filter: 1 단계, 이미지 1/1

Rotate the projector on its side with the Wi-Fi symbol and sliding lock facing you.

2 단계

Epson BrightLink 450Wi Air Filter Replacement: 2 단계, 이미지 1/3

Epson BrightLink 450Wi Air Filter Replacement: 2 단계, 이미지 2/3

Epson BrightLink 450Wi Air Filter Replacement: 2 단계, 이미지 3/3

Pull back the sliding lock in the direction away from the projector, and gently open the air filter door while still holding the lock open.

3 단계

Epson BrightLink 450Wi Air Filter Replacement: 3 단계, 이미지 1/3

Epson BrightLink 450Wi Air Filter Replacement: 3 단계, 이미지 2/3

Epson BrightLink 450Wi Air Filter Replacement: 3 단계, 이미지 3/3

Grab the air filter center tab, and pull it gently away from the projector.
Replace the filter by slotting in a new filter the same way it was pulled out.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Evan Sandoval

회원 가입일: 09/11/23

441 평판

안내서 3개 작성하였습니다

배지 +2개 더

팀

Austin Community College, Team 9-1, Watkins Spring 2024 Austin Community College, Team 9-1, Watkins Spring 2024 회원

AUSTINCC-WATKINS-S24S9G1

4 회원들

안내서 3개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 76