주요 콘텐츠로 건너뛰기

Equity Alarm Clock 13014 Alarm Switch Replacement

필요한 것

  1. Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: 1 단계, 이미지 1/3 Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: 1 단계, 이미지 2/3 Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: 1 단계, 이미지 3/3
    • Remove the battery door using your finger nail or an opening tool.

  2. Equity Alarm Clock 13014 Alarm Switch Replacement, Remove screws: 2 단계, 이미지 1/2 Equity Alarm Clock 13014 Alarm Switch Replacement, Remove screws: 2 단계, 이미지 2/2
    • Use a Phillips #1 screwdriver to remove the 3 screws on the back cover.

  3. Equity Alarm Clock 13014 Alarm Switch Replacement, Remove Cover: 3 단계, 이미지 1/1
    • Remove the back cover gently.

    • DO NOT pull the back cover off quickly or you may damage the wires connected.

  4. Equity Alarm Clock 13014 Alarm Switch Replacement: 4 단계, 이미지 1/2 Equity Alarm Clock 13014 Alarm Switch Replacement: 4 단계, 이미지 2/2
    • Use a Phillips #1 screwdriver to remove the small screw located above the alarm switch.

    • Remove the small screw located below the alarm switch as well.

  5. Equity Alarm Clock 13014 Alarm Switch Replacement: 5 단계, 이미지 1/2 Equity Alarm Clock 13014 Alarm Switch Replacement: 5 단계, 이미지 2/2
    • Place the end of the soldering iron on the end of the wire connected to the copper cylinder to detach the wire.

    • If you are unfamiliar with soldering, take a look at this article: How to Solder and Desolder Connections.

    • To replace the alarm switch, attach one end of new alarm switch wire to the copper cylinder.

    • Use a Phillips #1 screwdriver to reinstall the switch screws.

    • Follow steps in reverse order to assemble the clock.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Alaa

회원 가입일: 10/27/14

311 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 16

전체 시간: 1,085