주요 콘텐츠로 건너뛰기

Eton FRX5-BT Case Disassembly

필요한 것

  1. Eton FRX5-BT Case Disassembly, Remove plastic cap: 1 단계, 이미지 1/1
    • Press on the left most side on the small plastic cap on the back of the radio (it is loosely glued in place).

    • When the plastic cap comes loose, remove it completely to access the lock mechanism below.

  2. Eton FRX5-BT Case Disassembly, Remove the solar panel: 2 단계, 이미지 1/1
    • Slide the lock mechanism all the way to the left. Now the solar panel is no longer locked in place.

    • Remove the solar panel, by lifting it on the top part. You can use a suction cup or carefully tilt the device when it's in an upright position.

    • Be mindful on the wire connecting the solar panel to the rest of the device.

  3. Eton FRX5-BT Case Disassembly, Remove screws: 3 단계, 이미지 1/1
    • Remove the six 2.5mm Hex screws.

  4. Eton FRX5-BT Case Disassembly, Open the case: 4 단계, 이미지 1/1
    • Pull the two halves of the device case apart.

    • There are no wires connecting the two parts of the case, but the solar panel wire goes through a hole in the back case and connects it to the rest of the device.

결론

To reassemble your device, follow these instructions in reverse order.

Martin

회원 가입일: 06/06/24

124 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 18

전체 시간: 18