Eufy RoboVac 11S Filters Replacement

소개

Eufy RoboVac 11S won’t work very efficiently when there’s too much dust in the filter. Instead of buying a new vacuum, you can replace some accessories to bring life back to your vacuum robot. This guide shows how to replace the foam filter and high-performance filter in the dust collector.

필요한 것

1 단계 Filters

Eufy RoboVac 11S Filters Replacement, Filters: 1 단계, 이미지 1/2

Eufy RoboVac 11S Filters Replacement, Filters: 1 단계, 이미지 2/2

Press the dust collector release button.
Pull the dust collector out.

편집

2 단계

Push the blue button up and open the dust collector.
Empty the dust collector, and throw all the dust into the trash bin.

편집

3 단계

Eufy RoboVac 11S Filters Replacement: 3 단계, 이미지 3/3

Pull the hooks up to take out the pre-filter.
Pull the filter lightly because the hook by the filter is easy to break.

편집

4 단계

Eufy RoboVac 11S Filters Replacement: 4 단계, 이미지 3/3

Take out the high-performance filter to the side and use a cleaning brush to clean the filter.
Take out the foam filter to the side and dispose of it in the trash bin.

편집

5 단계

Use the cleaning brush to sweep the dust from the pre-filter.

편집

6 단계

Put the pre-filter back in the dust collector.
Use your finger to push the top button first.
Push the filter lightly because the hook by the filter is easy to break.

편집

7 단계

Open the back of the dust collector.
Replace the white foam filter.
Put the black high-performance filter at the top of the foam filter.
Make sure to put the foam filter before the high-performance filter, otherwise the robot will have problems cleaning.