주요 콘텐츠로 건너뛰기

Eureka 1660SP Roller Replacement

필요한 것

  1. Eureka 1660SP Roller Replacement, Roller: 1 단계, 이미지 1/2 Eureka 1660SP Roller Replacement, Roller: 1 단계, 이미지 2/2
    • Press the black separator switch and lightly pull the bottom half away from the top.

  2. Eureka 1660SP Roller Replacement: 2 단계, 이미지 1/2 Eureka 1660SP Roller Replacement: 2 단계, 이미지 2/2
    • Remove the vacuum head from the lower half of the body.

  3. Eureka 1660SP Roller Replacement: 3 단계, 이미지 1/3 Eureka 1660SP Roller Replacement: 3 단계, 이미지 2/3 Eureka 1660SP Roller Replacement: 3 단계, 이미지 3/3
    • Turn the vacuum head wheels up and remove all seven 13.9mm screws from the bottom using a #2 Phillips head screwdriver.

    • Separate the top and bottom of the vacuum head. Set the top aside.

  4. Eureka 1660SP Roller Replacement: 4 단계, 이미지 1/2 Eureka 1660SP Roller Replacement: 4 단계, 이미지 2/2
    • Turn the vacuum head's bottom over so that the inside of the head is facing up.

    • Using a Phillips #00 screwdriver, press down on metal bar of the roller on one side until it releases from the housing.

    • Turn the vacuum head's bottom over and pull at the roller and bar until they are completely out of the housing.

  5. Eureka 1660SP Roller Replacement: 5 단계, 이미지 1/1
    • Press the new bar and roller into place.

    • Replace the screws.

결승점

Jennifer Sheils

회원 가입일: 09/07/13

4 평판

안내서 2개 작성하였습니다

UMass Dartmouth, Team 1-1, Gulbrandsen Fall 2013 UMass Dartmouth, Team 1-1, Gulbrandsen Fall 2013 회원

UMASSD-GULBRANDSEN-F13S1G1

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 6

전체 시간: 432