기기를 수리하세요 커뮤니티 상점

Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement

소개

If the accessory holder is no longer able to hold the multiple tools associated with the vacuum, this guide outlines the its replacement.

필요한 것

  1. Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement, Hose: 1 단계, 이미지 1/2 Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement, Hose: 1 단계, 이미지 2/2

    • On the back of the vacuum, pull the handle connected to the hose away from the vacuum.

    편집

  2. Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement: 2 단계, 이미지 1/2 Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement: 2 단계, 이미지 2/2

    • Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose.

    편집

  4. Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement, Accessory Holder: 3 단계, 이미지 1/1

    • Using a T15 Torx Security Screwdriver, remove the screw on each side of the indention in which the hose normally rests.

    편집

  5. Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement: 4 단계, 이미지 1/1

    • Upon removal of the two screws, the accessory holder can be removed from the vacuum body.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Celina Burchett

회원 가입일: 10/13/14

1,122 평판

안내서 8개 작성하였습니다

배지: 13

배지 +10개 더

팀

Clemson, Team 2-2, Benson Fall 2014 Clemson, Team 2-2, Benson Fall 2014 회원

CLEM-BENSON-F14S2G2

4 회원들

안내서 18개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 634