기기를 수리하세요 커뮤니티 상점

Eureka EasyClean 71C Belt Replacement

소개

Sometimes, the belt in the vacuum can go bad or even just come loose. In order to properly maintain your vacuum, it’s important to know how to replace the belt. This guide covers the necessary steps for a successful replacement. Make sure your vacuum is off before attempting any replacements.

필요한 것

  1. Eureka EasyClean 71C Belt Replacement, Bottom Cover: 1 단계, 이미지 1/1

    • Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.

    편집

  2. Eureka EasyClean 71C Belt Replacement: 2 단계, 이미지 1/1

    • Pry off the Riser Visor using the plastic opening tool.

    편집

  4. Eureka EasyClean 71C Belt Replacement: 3 단계, 이미지 1/1

    • Remove the screw cap using the metal spudger.

    • First-time removal of the screw cap can be difficult. The screw cap isn’t vital, so don’t worry about damaging the screw cap and just keep trying until it comes out.

    편집

  5. Eureka EasyClean 71C Belt Replacement: 4 단계, 이미지 1/2 Eureka EasyClean 71C Belt Replacement: 4 단계, 이미지 2/2

    • Unscrew the 14mm PH2 Phillips head screw.

    • Pull the bottom cover off of the rest of the casing.

    편집

  6. Eureka EasyClean 71C Belt Replacement, Belt: 5 단계, 이미지 1/2 Eureka EasyClean 71C Belt Replacement, Belt: 5 단계, 이미지 2/2

    • Pull the roller, motor, and belt out of the casing.

    • Separate the belt from both the roller and the motor.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Tanner Durnil

회원 가입일: 11/06/17

631 평판

안내서 6개 작성하였습니다

배지: 10

배지 +7개 더

팀

IUPUI, Team S6-G4, Baechle Fall 2017 IUPUI, Team S6-G4, Baechle Fall 2017 회원

IUPUI-BAECHLE-F17S6G4

3 회원들

안내서 12개 작성하였습니다

댓글 한 개

Hello would you know what belt number this would use? I have looked everywhere. I would appreciate it

vdean4b - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 14

전체 시간: 1,520