기기를 수리하세요 커뮤니티 상점

Eureka SuctionSeal 2.0 Pet Filters Replacement

소개

This guide walks you through removing the exhaust and dust cup filters in the Eureka SuctionSeal 2.0 Pet vacuum. Refer to this guide if you notice a bad smell coming from your vacuum or you are experiencing poor suction.

  1. Eureka SuctionSeal 2.0 Pet Filters Replacement, Dust Cup: 1 단계, 이미지 1/2 Eureka SuctionSeal 2.0 Pet Filters Replacement, Dust Cup: 1 단계, 이미지 2/2

    • Place the device upright with the brush roller closest to you.

    • Pull up on the latch at the top of the dust cup.

    • Tilt the top of the dust cup forward and pull towards yourself, removing the container from the device.

    편집

  2. Eureka SuctionSeal 2.0 Pet Filters Replacement, Filters: 2 단계, 이미지 1/2 Eureka SuctionSeal 2.0 Pet Filters Replacement, Filters: 2 단계, 이미지 2/2

    • Locate the gray exhaust filter cover at the top of the vacuum's base.

    • Grip the two tabs in the middle of the filter cover and rotate it counter-clockwise.

    • Lift the cover away from the vacuum.

    편집

  4. Eureka SuctionSeal 2.0 Pet Filters Replacement: 3 단계, 이미지 1/1

    • Grab the tab on the exhaust filter.

    • Lift the filter straight up from the vacuum's base.

    편집

  5. Eureka SuctionSeal 2.0 Pet Filters Replacement: 4 단계, 이미지 1/2 Eureka SuctionSeal 2.0 Pet Filters Replacement: 4 단계, 이미지 2/2

    • Locate the lid at the top of the previously removed dust cup.

    • Lift the latch and lay the cover back.

    편집

  6. Eureka SuctionSeal 2.0 Pet Filters Replacement: 5 단계, 이미지 1/2 Eureka SuctionSeal 2.0 Pet Filters Replacement: 5 단계, 이미지 2/2

    • Pull up on the tag and remove the filter.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Anna Snyder

회원 가입일: 10/02/17

336 평판

안내서 3개 작성하였습니다

배지: 11

배지 +8개 더

팀

Cal Poly, Team S4-G5, Livingston Fall 2017 Cal Poly, Team S4-G5, Livingston Fall 2017 회원

CPSU-LIVINGSTON-F17S4G5

3 회원들

안내서 16개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 9

전체 시간: 586