소개

Does the remote control to your FAO Schwarz have a dead or corroded battery? This guide will show you how to replace your remote control battery in just four easy steps, with no additional tools needed. Your remote control should be working in no time!

도구

부품

부품은 필요하지 않습니다.

  1. Remove the plastic battery cover to get at the battery compartment.
    • Remove the plastic battery cover to get at the battery compartment.

    • The cover can be removed by pressing down on the lever and sliding.

  2. Remove the dead battery, being careful not to damage the internal battery connectors.
    • Remove the dead battery, being careful not to damage the internal battery connectors.

    • The battery is a bit wedged in there, so you'll have to press hard to pop it out.

    • Insert the new 6F22 9 volt battery.

    • Line up the positive icons on the battery with the positive icons in the battery compartment.

결론

To reassemble your device, follow these instructions in reverse order.

Elly Murray

회원 가입일: 2018년 09월 07일

109 평판

안내서 1개 작성함

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 34

전체 시간: 60