기기를 수리하세요 커뮤니티 상점

Fast Fix Box Cutter Blade Replacement

소개

Over time your box cutter can become dull, rusted, or even break off. If this happens to you then this guide is perfect for you. Warning this replacement involves dealing with a sharp blade so be sure to use caution.

필요한 것

  1. Fast Fix Box Cutter Blade Replacement, Blade: 1 단계, 이미지 1/3 Fast Fix Box Cutter Blade Replacement, Blade: 1 단계, 이미지 2/3 Fast Fix Box Cutter Blade Replacement, Blade: 1 단계, 이미지 3/3

    • The case screw can easily be removed by using a Stanley #2 screwdriver or any other #2 screwdriver.

    번역하기

  2. Fast Fix Box Cutter Blade Replacement: 2 단계, 이미지 1/1

    • Separate casing by simply pulling apart both halves.

    번역하기

  3. Fast Fix Box Cutter Blade Replacement: 3 단계, 이미지 1/2 Fast Fix Box Cutter Blade Replacement: 3 단계, 이미지 2/2

    • Carefully, using the pull tab, take out the blade holder and set it on the table.

    • Remove the blade by carefully sliding it out of the holder.

    • Be very careful when dealing with the blade as it is sharp.

    번역하기

  5. Fast Fix Box Cutter Blade Replacement: 4 단계, 이미지 1/2 Fast Fix Box Cutter Blade Replacement: 4 단계, 이미지 2/2

    • Replace the old blade with the new blade by carefully sliding it into the blade holder.

    • Place the blade holder back into the casing using the pull tab to hold it.

    • Be very careful when dealing with the blade as it is sharp.

    번역하기

  6. Fast Fix Box Cutter Blade Replacement: 5 단계, 이미지 1/2 Fast Fix Box Cutter Blade Replacement: 5 단계, 이미지 2/2

    • Add grease to the sliding mechanism

    • Use either a paper towel or a cloth to spread the grease around the sliding mechanism.

    번역하기

  7. Fast Fix Box Cutter Blade Replacement: 6 단계, 이미지 1/2 Fast Fix Box Cutter Blade Replacement: 6 단계, 이미지 2/2

    • Take the other half without the blade and put it back together with the other half with the blade.

    • Snap the two parts together.

    • Place the screw back in to hole while holding the casing together.

    번역하기

  8. Fast Fix Box Cutter Blade Replacement: 7 단계, 이미지 1/2 Fast Fix Box Cutter Blade Replacement: 7 단계, 이미지 2/2

    • Use Stanley #2, or any other #2, screwdriver to screw the casing back together.

    • To ensure proper placement of the blade, activate the mechanism that slides the blade out.

    • Once it comes out, like in second picture, you are done.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Peace Adeyemo

회원 가입일: 02/22/18

145 평판

안내서 1개 작성함

배지: 2

팀

University of Memphis, Team S5-G7, Baddour Spring 2018 University of Memphis, Team S5-G7, Baddour Spring 2018 회원

UM-BADDOUR-S18S5G7

3 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 49

전체 시간: 8,873