소개
If the speaker is dead or blown, install a new one.
필요한 것
-
-
Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.
-
-
-
-
Using tape or a post-it, label the input and output wires on the reverb. Remove these wires from the box.
-
거의 끝나갑니다!
To install the new speaker, follow the instructions given in reverse.
결론
To install the new speaker, follow the instructions given in reverse.
다른 한 분이 해당 안내서를 완성하였습니다.