Fisher Paykel Neopuff Valve System Replacement

소개

NOTE: The valves are an integral part of the valve, panel and manifold assembly and are not able to be serviced. Please specify the model number from the parts list (section 4.1.2) when ordering a replacement valve assembly.

Please reference the parts list below for the disassembly diagram.

Please refer to page 7 of the device’s Technical Manual for source information.

필요한 것

1 단계 Valve System

Fisher Paykel Neopuff Valve System Replacement, Valve System: 1 단계, 이미지 1/1

Remove the back cover, fixed by four screws.

번역하기

2 단계

Disconnect the tube from the manometer.

번역하기

3 단계

Remove the manometer by unscrewing the two retaining nuts.

번역하기

4 단계

Fit the existing manometer into the new valve assembly panel.

번역하기

5 단계

Tighten the retaining nuts.

번역하기

6 단계

Reconnect the manometer tube.

번역하기

7 단계

Refit the front panel to the back cover with the four screws from step 1.

번역하기

8 단계

Carry out the valve system performance test described above. It is recommended to record the lot number of the new valve assembly onto the Set-up and Maintenance Checklist.

번역하기