주요 콘텐츠로 건너뛰기

Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass

필요한 것

동영상 개요

  1. Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass, Put a new OCA: 1 단계, 이미지 1/2 Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass, Put a new OCA: 1 단계, 이미지 2/2
    • We put a new OCA on a new Samsung Galaxy Note 8 touch screen. It doesn’t paste on the touch screen because the protector of the OCA is no need to be torn off. And you can move the OCA around until you get the right place.

  2. Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass, Using upper mold: 2 단계, 이미지 1/2 Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass, Using upper mold: 2 단계, 이미지 2/2
    • Then we put the upper mold on the base one after we align the position and continue to press it with our hands.

    • At this moment, the OCA is absorbed on the upper mold.

  3. Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass, Remove the protector of the OCA: 3 단계, 이미지 1/1
    • Remove the protector of the OCA

  4. Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass, Remove protector of the new touch screen: 4 단계, 이미지 1/1
    • For this step, we can use an easy tape to tear off the protector of the touch screen.

  5. Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass, Using lamination machine: 5 단계, 이미지 1/2 Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass, Using lamination machine: 5 단계, 이미지 2/2
    • After finishing the above steps, we put the whole set of mold into RMB-2 Laminating Machine for bonding.

    • For the whole process, the vacuum time we set is 30s and the lamination time is 10s, the total time for the lamination only needs 40s.

    • Now let’s see the final result after the lamination. There is no any bubble on the touch screen and the OCA’s position is completely unbiased and exactly overlap with touch screen. So the lamination effect is excellent.

결론

Why we say this mold is so effective? As during the bonding or before the bonding, the protector of the OCA doesn’t need to be ripped off. It is very precise and accurate because you can move and align the position optionally until you get a best place.

다른 4명이 해당 안내서를 완성하였습니다.

FORWARD Lab

회원 가입일: 04/17/20

1,474 평판

안내서 9개 작성하였습니다

댓글 2개

Thanks for that useful informations……. Also visit

(https://rb.gy/hmx3oc)

Selma Dietheimer - 답글

thanks for your appreciate

FORWARD Lab -

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 13

30일 전: 89

전체 시간: 7,601