기기를 수리하세요 커뮤니티 상점

Fixing a Rusted Measuring Tape

소개

Use this guide to fix any rusted measuring tape.

Over time measuring tapes tend to rust. It prevents accurate measurements, which can impact your project. This guide illustrates 7 steps to make any rusted measuring tape work accurately again.

필요한 것

  1. Fixing a Rusted Measuring Tape, Measuring Tape: 1 단계, 이미지 1/1

    • Untighten the 9.5 mm Phillips screw with the Phillips screwdriver.

    • Remove the belt clip.

    번역하기

  2. Fixing a Rusted Measuring Tape: 2 단계, 이미지 1/1

    • Pull the case length off.

    번역하기

  4. Fixing a Rusted Measuring Tape: 3 단계, 이미지 1/1

    • Untighten the 15.7 mm Phillips screw with the Phillips screwdriver.

    번역하기

  5. Fixing a Rusted Measuring Tape: 4 단계, 이미지 1/1

    • Open the case with hands.

    번역하기

  6. Fixing a Rusted Measuring Tape: 5 단계, 이미지 1/1

    • Spray lubricant solution (WD-40) into the spring as indicated.

    번역하기

  7. Fixing a Rusted Measuring Tape: 6 단계, 이미지 1/1

    • Pull tape in and out to ensure all the lubricant is applied to the spring.

    • Apply lubricant in increments (be gentle and apply slowly).

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Miles Kim

회원 가입일: 04/25/24

133 평판

안내서 1개 작성함

배지: 2

팀

UC Davis, Team 3-4, Whithaus Spring 2024 UC Davis, Team 3-4, Whithaus Spring 2024 회원

UCD-WHITHAUS-S24S3G4

3 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 17

전체 시간: 54