주요 콘텐츠로 건너뛰기

Flip Video Ultra USB connector Replacement

필요한 것

  1. Flip Video Ultra USB connector Replacement, USB connector: 1 단계, 이미지 1/1
    • Unlock the battery cover by sliding the switch to the unlock position.

  2. Flip Video Ultra USB connector Replacement: 2 단계, 이미지 1/1
    • Remove the battery cover by sliding it down the camera.

  3. Flip Video Ultra USB connector Replacement: 3 단계, 이미지 1/1
    • Remove the batteries.

  4. Flip Video Ultra USB connector Replacement: 4 단계, 이미지 1/1
    • Slide the black upper casing off from the device.

    • This is a bit hard to get off, so don't be afraid to use a bit of force. There is no lock.

  5. Flip Video Ultra USB connector Replacement: 5 단계, 이미지 1/2 Flip Video Ultra USB connector Replacement: 5 단계, 이미지 2/2
    • Remove the six 1mm screws from front of the camera with the Phillips Head screwdriver.

  6. Flip Video Ultra USB connector Replacement: 6 단계, 이미지 1/1
    • Remove the top casing from the bottom to reveal the inner circuit board.

  7. Flip Video Ultra USB connector Replacement: 7 단계, 이미지 1/2 Flip Video Ultra USB connector Replacement: 7 단계, 이미지 2/2
    • When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.

    • Remove the six 1mm screws with the 1 Phillips head screwdriver.

  8. Flip Video Ultra USB connector Replacement: 8 단계, 이미지 1/2 Flip Video Ultra USB connector Replacement: 8 단계, 이미지 2/2
    • Gently separate the circuit board from the casing.

  9. Flip Video Ultra USB connector Replacement: 9 단계, 이미지 1/2 Flip Video Ultra USB connector Replacement: 9 단계, 이미지 2/2
    • Remove the three 1mm screws from the USB connector and back casing with the Phillips Head screwdriver.

  10. Flip Video Ultra USB connector Replacement: 10 단계, 이미지 1/2 Flip Video Ultra USB connector Replacement: 10 단계, 이미지 2/2
    • Gently lift the usb connector using the Plastic opening tool.

    • Using tweezers, remove the cord from the motherboard by gently lifting the connector.

    • The connector will be easier to remove if you wiggle the tweezers while lifting.

  11. Flip Video Ultra USB connector Replacement: 11 단계, 이미지 1/1
    • Fully remove the USB connector and replace it with the new USB connector.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Nathaniel Ruf

회원 가입일: 10/18/16

514 평판

안내서 5개 작성하였습니다

UMass Dartmouth, Team 5-7, Martin Fall 2016 UMass Dartmouth, Team 5-7, Martin Fall 2016 회원

UMASSD-MARTIN-F16S5G7

3 회원들

안내서 10개 작성하였습니다

댓글 2개

My USB port broke off so is there anyway I could save my videos that where om there

Corrina Guerrero - 답글

Where do you purchase the replacement usb connector?

DeEtte Moore - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 15

전체 시간: 1,032