기기를 수리하세요 커뮤니티 상점

Fossil Speedway Watch TI-5061 Watchband Link Replacement

소개

Sometimes the band links will become rusted or scratched. To preserve the beauty of the titanium watch, you can replace a the damaged link with a new one.

필요한 것

  1. Fossil Speedway Watch TI-5061 Watchband Link Replacement, Band Link: 1 단계, 이미지 1/1

    • Locate the link on the band with arrows pointing in opposite directions.

    • Place push pin into the hole on one side of the link.

    번역하기

  2. Fossil Speedway Watch TI-5061 Watchband Link Replacement: 2 단계, 이미지 1/1

    • Hit the push pin with the blunt object (we used scissors) until the small metal rod sticks out from the link.

    • Pull the rod out using your fingers.

    • Repeat on the other side to remove the entire link.

    번역하기

  4. Fossil Speedway Watch TI-5061 Watchband Link Replacement: 3 단계, 이미지 1/2 Fossil Speedway Watch TI-5061 Watchband Link Replacement: 3 단계, 이미지 2/2

    • To replace the link, insert the open end of one of the connected links into the open end of the new link.

    • Place the rod into the aligning holes and use the blunt object to hammer the rod into the link.

    번역하기

    • Repeat on the other side of the link to remove it completely.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Zachary Price

회원 가입일: 04/28/15

588 평판

안내서 3개 작성하였습니다

배지: 13

배지 +10개 더

팀

Cal Poly, Team 14-10, Amido Spring 2015 Cal Poly, Team 14-10, Amido Spring 2015 회원

CPSU-AMIDO-S15S14G10

3 회원들

안내서 5개 작성하였습니다

댓글 한 개

Looking for 3 extra watch band links for a fossil big tic model jr8622 18mm width could you tell me please how much this will cost please with delivery as well to croydon in Surrey

Kind regards colin

Colin Evans - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 11

30일 전: 32

전체 시간: 1,343