메인 콘텐츠로 스킵하기

소개

Remove and replace LCD screen.

  1. Remove the batteries from the camera to prevent danger of electric shock.
    • Remove the batteries from the camera to prevent danger of electric shock.

  2. Locate all five screws on the camera. Then proceed to remove all the screws. Locate all five screws on the camera. Then proceed to remove all the screws. Locate all five screws on the camera. Then proceed to remove all the screws.
    • Locate all five screws on the camera. Then proceed to remove all the screws.

  3. Beware, if your screwdriver does not fit properly, you may damage the screws' heads.
    • Beware, if your screwdriver does not fit properly, you may damage the screws' heads.

    • If your screwdriver does not fit, or you do not have the proper one, you can use a hot glue gun to fix the screwdriver to the head of the screw. Wait for it to harden slightly, and then try to remove the screws.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Remove outer case.  Pull the back away from the main body of the camera. Remove outer case.  Pull the back away from the main body of the camera.
    • Remove outer case. Pull the back away from the main body of the camera.

  6. Locate the LCD screen and anchoring screw.
    • Locate the LCD screen and anchoring screw.

    • Remove screw.

  7. Carefully pull the LCD screen away from the board it is connected to.
    • Carefully pull the LCD screen away from the board it is connected to.

  8. Push both blue switches away from the holding device to unleach lcd ribbon.
    • Push both blue switches away from the holding device to unleach lcd ribbon.

    • Be careful when removing ribbon. If you damage it, you will need to replace it as well.

  9. Carefully detach the ribbon from where it was connected by the blue pins.
    • Carefully detach the ribbon from where it was connected by the blue pins.

  10. Now that everything has been disconnected from the board, remove LCD screen.
    • Now that everything has been disconnected from the board, remove LCD screen.

결론

To reassemble your device, follow these instructions in reverse order.

Cody

회원 가입일: 2010년 04월 18일

47 평판

안내서 4개 작성하였습니다

Cal Poly, Team 7-11, Maness Spring 2010 Cal Poly, Team 7-11, Maness Spring 2010 회원

CPSU-MANESS-S10S7G11

3 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 5,857