주요 콘텐츠로 건너뛰기

Fujifilm FinePix XP80 Exterior Case Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. Fujifilm FinePix XP80 Exterior Case Replacement, Exterior Case: 1 단계, 이미지 1/1
    • Using a Phillips PH000 bit, remove the five 2mm screws on the bottom of the camera.

  2. Fujifilm FinePix XP80 Exterior Case Replacement: 2 단계, 이미지 1/1
    • Using a H1.3 hex head bit, remove the two 2mm screws from the top of the camera.

  3. Fujifilm FinePix XP80 Exterior Case Replacement: 3 단계, 이미지 1/1
    • Using a H1.3 hex head bit, remove the two 2mm screws on the side of the camera.

  4. Fujifilm FinePix XP80 Exterior Case Replacement: 4 단계, 이미지 1/1
    • Using a plastic opening tool, gently pry up the edge of the button case, located at the top of the camera, until it unclips.

  5. Fujifilm FinePix XP80 Exterior Case Replacement: 5 단계, 이미지 1/1
    • Gently pry the side area of the case apart.

  6. Fujifilm FinePix XP80 Exterior Case Replacement: 6 단계, 이미지 1/1
    • Continue using the opening tool on the bottom of the camera to gently pry the case apart.

  7. Fujifilm FinePix XP80 Exterior Case Replacement: 7 단계, 이미지 1/2 Fujifilm FinePix XP80 Exterior Case Replacement: 7 단계, 이미지 2/2
    • Use the plastic opening tool to carefully pry the yellow front panel completely away from the camera.

    • Use your hands to take off the yellow back panel.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Busra Atalay

회원 가입일: 09/29/16

49 평판

안내서 2개 작성하였습니다

USF Tampa, Team 1-3, Cagle Fall 2016 USF Tampa, Team 1-3, Cagle Fall 2016 회원

USFT-CAGLE-F16S1G3

5 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 62