기기를 수리하세요 커뮤니티 상점

GM Key Fob Plastic Housing Replacement

소개

This purpose of this guide is to provide clear instructions for replacing the plastic housing for a GM Key Fob. Replacing just the housing, instead of the entire Fob, can save the individual a significant amount of money in addition to reducing environmental and electrical waste.

필요한 것

  1. GM Key Fob Plastic Housing Replacement, Key Fob Plastic Housing: 1 단계, 이미지 1/1

    • Pry apart the key ring to remove it from the old housing.

    편집

  2. GM Key Fob Plastic Housing Replacement: 2 단계, 이미지 1/3 GM Key Fob Plastic Housing Replacement: 2 단계, 이미지 2/3 GM Key Fob Plastic Housing Replacement: 2 단계, 이미지 3/3

    • Once you have removed the key ring, use it to open the housing by wedging it into the groove, as pictured.

    편집

  4. GM Key Fob Plastic Housing Replacement: 3 단계, 이미지 1/2 GM Key Fob Plastic Housing Replacement: 3 단계, 이미지 2/2

    • Remove the electrical board and rubber key pad from the old housing.

    편집

  5. GM Key Fob Plastic Housing Replacement: 4 단계, 이미지 1/2 GM Key Fob Plastic Housing Replacement: 4 단계, 이미지 2/2

    • Remove the electrical board from the rubber key pad.

    편집

  6. GM Key Fob Plastic Housing Replacement: 5 단계, 이미지 1/2 GM Key Fob Plastic Housing Replacement: 5 단계, 이미지 2/2

    • If necessary, remove the battery from the electrical board and replace it.

    편집

  7. GM Key Fob Plastic Housing Replacement: 6 단계, 이미지 1/1

    • After Opening the new Key Fob package, select the correct housing as more than one model is included.

    편집
결론

To reassemble your device, simply follow these disassembly instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Megan Hayden

회원 가입일: 10/06/16

136 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

University of Memphis, Team 4-3, Baddour Fall 2016 University of Memphis, Team 4-3, Baddour Fall 2016 회원

UM-BADDOUR-F16S4G3

3 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 24

전체 시간: 2,454