메인 콘텐츠로 스킵하기

부품

지정된 부품이 없습니다.

  1. Lay everything out
    • Lay everything out

  2. Remove the drum key and Allen wrenches from the right side of the primary pedal. Remove the drum key and Allen wrenches from the right side of the primary pedal.
    • Remove the drum key and Allen wrenches from the right side of the primary pedal.

  3. Slide the ends of the long black connector onto the sides of the pedals. Both sides of the connection are shaped like a half-circle, so they can only connect in the proper orientation.
    • Slide the ends of the long black connector onto the sides of the pedals.

    • Both sides of the connection are shaped like a half-circle, so they can only connect in the proper orientation.

    • Ensure all the screws on the connector are pointing up. To do so, you will need to "wind" the secondary pedal up manually before attaching the connector.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Insert the beaters into the primary pedal. You can choose to use either side of the beaters - just be consistent!
    • Insert the beaters into the primary pedal.

    • You can choose to use either side of the beaters - just be consistent!

  6. Arrange the pedals in the drumkit. The primary pedal should be centered on the kick drum, while the secondary pedal should be wherever comfortable. If necessary use the drum key to adjust the height of the beaters to be vertically centered on the kick drum. Now tighten everything down!
    • Arrange the pedals in the drumkit. The primary pedal should be centered on the kick drum, while the secondary pedal should be wherever comfortable.

    • If necessary use the drum key to adjust the height of the beaters to be vertically centered on the kick drum.

    • Now tighten everything down!

  7. Tighten and loosen the nuts on the bottom of the springs until both pedals have an even, comfortable tension.
    • Tighten and loosen the nuts on the bottom of the springs until both pedals have an even, comfortable tension.

  8. Replace the tools in the pedal for safe-keeping. Bag the extra parts in case you want to convert your double-bass pedal into two singles.
    • Replace the tools in the pedal for safe-keeping.

    • Bag the extra parts in case you want to convert your double-bass pedal into two singles.

  9. Pound out some sick beats!
    • Pound out some sick beats!

결승점

다른 6명이 해당 안내서를 완성하였습니다.

James Pearson Hughes

회원 가입일: 2010년 05월 27일

650 평판

안내서 1개 작성함

eXifiters eXifiters 회원

Community

1 회원

안내서 1개 작성하였습니다

Nice to see some double bass enthusiasts on here! I am in the process of building an electronic midi drumset from piezos, some old stationary cardio equipment and an alesis dm5. The tooling, oh the tooling. Taps and dies, welding, now i need a lathe to make a double bass pedal from scratch... Www.gpsn.uspto.gov is a great resource for technical info and also creepy government technology. Ill post when i can. Peace

Scott Haddox - 답글

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 11

지난 30일: 24

전체 시간: 2,068