주요 콘텐츠로 건너뛰기

Game Boy Color Back Housing Replacement

필요한 것

  1. Game Boy Color Back Housing Replacement, Battery: 1 단계, 이미지 1/2 Game Boy Color Back Housing Replacement, Battery: 1 단계, 이미지 2/2
    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

  2. Game Boy Color Back Housing Replacement: 2 단계, 이미지 1/1
    • Remove the batteries from the battery compartment.

  3. Game Boy Color Back Housing Replacement, Back Housing: 3 단계, 이미지 1/1
    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

    I did this with a Y0 bit. It works if you are careful. I wouldn't recommend it on other consoles but for this tiny thing, it works.

    phnome - 답글

    The guide says a Y0 is needed. Is it a Y1 or Y0?

    Trav - 답글

  4. Game Boy Color Back Housing Replacement: 4 단계, 이미지 1/2 Game Boy Color Back Housing Replacement: 4 단계, 이미지 2/2
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

결론

To reassemble your device, follow these instructions in reverse order.

다른 16명이 해당 안내서를 완성하였습니다.

Angela Yoeurng

회원 가입일: 01/18/13

1,662 평판

안내서 2개 작성하였습니다

Cal Poly, Team 19-47, Regan Winter 2013 Cal Poly, Team 19-47, Regan Winter 2013 회원

CPSU-REGAN-W13S19G47

4 회원들

안내서 56개 작성하였습니다

댓글 한 개

Can’t seem to figure out how to remove the battery prongs off the back housing :(

Eddy G - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 25

30일 전: 111

전체 시간: 8,466