기기를 수리하세요

수리할 권리

상점

Game Boy Color Screen Cover Replacement

작성자 Nick Katsantones (또 다른 기여자 7명)
  • 댓글 6
  • 즐겨찾기 9
  • 완료: 18

난이도

보통

단계

8

소요 시간

15 - 20 분

섹션

4

플래그

1

Featured Student Guide

추천 학생 안내서

해당 안내서는 저희 멋진 학생들의 노력으로 만들어졌으며 iFixit 직원들이 뛰어난 안내서로 판명하였습니다.

소개

The screen cover is the plastic window in front of the LCD screen. This guide shows how to replace the screen cover of the Game Boy Color.

  1. Locate the battery compartment on the back of the Game Boy Color. Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

    편집

  2. Remove the batteries from the battery compartment.

    • Remove the batteries from the battery compartment.

    편집

  3. Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

    편집

  5. Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out! Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

    편집

  6. Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture. Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

    • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

    편집

  7. Gently lift the motherboard from the front housing.

    • Gently lift the motherboard from the front housing.

    편집

  8. Carefully slide a razor blade under one of the corners of the screen cover.

    • Carefully slide a razor blade under one of the corners of the screen cover.

    편집

  9. Carefully lift up on the corner of the screen until you can grab the corner with your fingers.

    • Carefully lift up on the corner of the screen until you can grab the corner with your fingers.

    • Continue gently pulling up on the cover until it is fully removed.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 18명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 7명과 함께

Nick Katsantones

회원 가입일: 2013년 01월 18일

613 평판

안내서 4개 작성하였습니다

배지: 13

배지 +10개 더

팀

Cal Poly, Team 19-47, Regan Winter 2013 Cal Poly, Team 19-47, Regan Winter 2013 회원

CPSU-REGAN-W13S19G47

4 회원들

안내서 36개 작성하였습니다

댓글 4개

의견 추가하세요

bro, you mustn't to dismount the console to only remove the old lend

sdfsafas - 답글

You only need step 7 and 8.

h027299c - 답글

An alternative method is to in step 7 insert a small screwdriver into the hole in the front shell where the power light goes through and push off the screen enough to pry it off with your hands. Thereby avoiding this razor-near-the-screen business. You will also most likely need some alcohol (or similar) to loosen the residue leftover from the old screen.

Nick G - 답글

Yes that's true! I've seen repair videos where they do it the way you mentioned, much less of a headache

David Hannum -

댓글 쓰기

조회 통계:

24 시간 전: 7

7일 전: 56

30일 전: 185

전체 시간: 15,876