주요 콘텐츠로 건너뛰기

소개

This guide will walk users through removing the Dash Cam's casing revealing the internal components, allowing access to rechargeable battery.

  1. Be sure to turn off the Dash Cam by pressing the power button. Be sure to turn off the Dash Cam by pressing the power button.
    • Be sure to turn off the Dash Cam by pressing the power button.

  2. Rotate the Dash Cam to where the socket faces you. Remove the 9 mm screw using the Torx T6 screwdriver.
    • Rotate the Dash Cam to where the socket faces you.

    • Remove the 9 mm screw using the Torx T6 screwdriver.

  3. Remove the Dash Cam socket piece. Remove the Dash Cam socket piece.
    • Remove the Dash Cam socket piece.

  4. 안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기

    안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기
  5. Rotate the Dash Cam to where the product information faces you. Remove the two 5 mm screws using the Torx T5 screwdriver.
    • Rotate the Dash Cam to where the product information faces you.

    • Remove the two 5 mm screws using the Torx T5 screwdriver.

  6. Remove top case from the bottom case. The compact nature of the casing requires use of the metal spudger for needed leverage. The compact nature of the casing requires use of the metal spudger for needed leverage.
    • Remove top case from the bottom case.

    • The compact nature of the casing requires use of the metal spudger for needed leverage.

  7. Remove the two 5mm screws using the Torx T5 screwdriver By removing the screws, the metal battery frame will now become free from the rest of the device. By removing the screws, the metal battery frame will now become free from the rest of the device.
    • Remove the two 5mm screws using the Torx T5 screwdriver

    • By removing the screws, the metal battery frame will now become free from the rest of the device.

  8. Remove the green tape overlying the pin connector with tweezers. Remove the pin connector using tweezers. Do not break black cord connection between motherboard and metal mount (orange circle).
    • Remove the green tape overlying the pin connector with tweezers.

    • Remove the pin connector using tweezers.

    • Do not break black cord connection between motherboard and metal mount (orange circle).

  9. This step shows the use of an incorrect tool. Only use ESD safe tools when handling the battery. With the the nylon spudger, lift the battery to expose and stretch the glue. Cut the glue residue by gliding the tool from left to right. With the the nylon spudger, lift the battery to expose and stretch the glue. Cut the glue residue by gliding the tool from left to right.
    • This step shows the use of an incorrect tool. Only use ESD safe tools when handling the battery.

    • With the the nylon spudger, lift the battery to expose and stretch the glue. Cut the glue residue by gliding the tool from left to right.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Jesse Hillman

회원 가입일: 2016년 10월 04일

715 평판

안내서 5개 작성하였습니다

USF Tampa, Team 2-1, Cagle Fall 2016 USF Tampa, Team 2-1, Cagle Fall 2016 회원

USFT-CAGLE-F16S2G1

4 회원들

안내서 5개 작성하였습니다

An excellent article except for one major problem but, why does iFixIt not sell theses batteries or direct you on where a person could actually buy one? This knowledge is pretty much useless with out a replacement battery to actually use.

Bradley Hyman - 답글

Thank you for the guide as it is very helpful! Here's the replacement battery needed for the Fenix 3 HR. It's brand new, it comes with all the necessary installation tools and it has a 1 year warranty! Dash Cam 20 Replacement Battery

Mike - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 45

전체 시간: 1,899