주요 콘텐츠로 건너뛰기
  1. Be sure to turn off the Dash Cam by pressing the power button. Be sure to turn off the Dash Cam by pressing the power button.
    • Be sure to turn off the Dash Cam by pressing the power button.

  2. Rotate the Dash Cam to where the socket faces you. Remove the 9 mm screw using the Torx T6 screwdriver.
    • Rotate the Dash Cam to where the socket faces you.

    • Remove the 9 mm screw using the Torx T6 screwdriver.

  3. Remove the Dash Cam socket piece. Remove the Dash Cam socket piece.
    • Remove the Dash Cam socket piece.

  4. Rotate the Dash Cam to where the product information faces you. Remove the two 5 mm screws using the Torx T5 screwdriver.
    • Rotate the Dash Cam to where the product information faces you.

    • Remove the two 5 mm screws using the Torx T5 screwdriver.

  5. Remove top case from the bottom case. The compact nature of the casing requires use of the metal spudger for needed leverage. The compact nature of the casing requires use of the metal spudger for needed leverage.
    • Remove top case from the bottom case.

    • The compact nature of the casing requires use of the metal spudger for needed leverage.

  6. 안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기

    안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기
  7. Remove the two 5mm screws using the Torx T5 screwdriver By removing the screws, the metal battery frame will now become free from the rest of the device. By removing the screws, the metal battery frame will now become free from the rest of the device.
    • Remove the two 5mm screws using the Torx T5 screwdriver

    • By removing the screws, the metal battery frame will now become free from the rest of the device.

  8. This step shows the use of an incorrect tool. Always use an ESD safe tool, like a nylon spudger, when working with delicate internal components. Use the nylon spudger to pry the corner of the case off of the motherboard.
    • This step shows the use of an incorrect tool. Always use an ESD safe tool, like a nylon spudger, when working with delicate internal components.

    • Use the nylon spudger to pry the corner of the case off of the motherboard.

  9. Remove the metal case off of the motherboard. Remove the metal case off of the motherboard. Remove the metal case off of the motherboard.
    • Remove the metal case off of the motherboard.

  10. Remove the battery connection. Remove the battery connection. Remove the battery connection.
    • Remove the battery connection.

  11. Remove the three 5 mm screws using the Torx T5 screwdriver. Remove the three 5 mm screws using the Torx T5 screwdriver. Remove the three 5 mm screws using the Torx T5 screwdriver.
    • Remove the three 5 mm screws using the Torx T5 screwdriver.

  12. Use tweezers to remove the connector on the top right of the motherboard. Use tweezers to remove the connector on the top right of the motherboard. Use tweezers to remove the connector on the top right of the motherboard.
    • Use tweezers to remove the connector on the top right of the motherboard.

  13. Remove the motherboard from the case and flip to reveal SD connection. Use tweezers to remove the connector next to the SD card slot. Use tweezers to remove the connector next to the SD card slot.
    • Remove the motherboard from the case and flip to reveal SD connection.

    • Use tweezers to remove the connector next to the SD card slot.

  14. The motherboard is now removed aside from the copper strip and its connector.
    • The motherboard is now removed aside from the copper strip and its connector.

    • Disconnect from the front case and the copper strip.

  15. Use the Torx T5 screwdriver to remove the two 5mm screws. These screws hold the camera in place. Therefore, the lens will fall into the bottom case.
    • Use the Torx T5 screwdriver to remove the two 5mm screws.

    • These screws hold the camera in place. Therefore, the lens will fall into the bottom case.

  16. The camera lens is now detached.
    • The camera lens is now detached.

결론

To reassemble your device, follow these instructions in reverse order.

Jesse Hillman

회원 가입일: 2016년 10월 04일

715 평판

안내서 5개 작성하였습니다

USF Tampa, Team 2-1, Cagle Fall 2016 USF Tampa, Team 2-1, Cagle Fall 2016 회원

USFT-CAGLE-F16S2G1

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 3

30일 전: 9

전체 시간: 342