Garmin Fenix 3 Wrist Strap Replacement - iFixit 수리 안내서

소개

This replacement will require use of both hands and unusual hand placement. Pay close attention to the images to ensure success in replacing this part.

필요한 것

1 단계 Wrist Strap

Garmin Fenix 3 Wrist Strap Replacement, Wrist Strap: 1 단계, 이미지 1/1

Identify the screws near the bases of two wrist straps.

2 단계

Garmin Fenix 3 Wrist Strap Replacement: 2 단계, 이미지 1/1

Hold one screwdriver firmly in one hand, as demonstrated in the image.

3 단계

Garmin Fenix 3 Wrist Strap Replacement: 3 단계, 이미지 1/1

Secure the watch in the same hand, positioning the screwdriver over the screw.

4 단계

Garmin Fenix 3 Wrist Strap Replacement: 4 단계, 이미지 1/1

Once the watch is secure, insert the screwdriver into the screw, and hold firmly.

5 단계

Garmin Fenix 3 Wrist Strap Replacement: 5 단계, 이미지 1/1

With the watch and the first screwdriver secure, insert the second screwdriver into the opposite screw.
Holding the first screwdriver firmly, unscrew using the second screwdriver.

6 단계

Garmin Fenix 3 Wrist Strap Replacement: 6 단계, 이미지 1/1

Remove the bar from the wrist strap to release.
Depending on which side the bar is inserted, you may end up loosening the screw instead of the bar. Keep this in mind to avoid losing your screws.

7 단계

Garmin Fenix 3 Wrist Strap Replacement: 7 단계, 이미지 1/1

Repeat this process for the other side, adjusting the position of the watch accordingly.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Adam Estabrook

회원 가입일: 09/07/18

1,057 평판

안내서 5개 작성하였습니다

배지 +11개 더

팀

Appalachian State University, Team S1-G3, Menagarishvili Fall 2018 Appalachian State University, Team S1-G3, Menagarishvili Fall 2018 회원

APSU-MENAGARISHVILI-F18S1G3

3 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 16

전체 시간: 3,667