소개
The needed tools are a T5 Torx Screwdriver and a plastic opening tool. In order to get to the inside of the device the nameplate and the back of the device will be taken off.
필요한 것
-
-
Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.
-
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.