기기를 수리하세요 커뮤니티 상점

Garmin Nuvi 260W Circuit Board Replacement

소개

This device can be identified utilizing the criterion on the device page. When replacing the motherboard, be sure to set aside the following tools: T5 Torx screwdriver, PH #0 screwdriver, and plastic opening tool.

필요한 것

  1. Garmin Nuvi 260W Circuit Board Replacement, Circuit Board: 1 단계, 이미지 1/1

    • Carefully remove model/serial number sticker.

    편집

  2. Garmin Nuvi 260W Circuit Board Replacement: 2 단계, 이미지 1/1

    • Remove two 4mm T5 Torx screws located under the sticker.

    편집

  4. Garmin Nuvi 260W Circuit Board Replacement: 3 단계, 이미지 1/2 Garmin Nuvi 260W Circuit Board Replacement: 3 단계, 이미지 2/2

    • Once screws are removed, use the plastic opening tool to carefully separate the body from the screen encasing.

    편집

  5. Garmin Nuvi 260W Circuit Board Replacement: 4 단계, 이미지 1/1

    • Once the body of the nüvi is separated, carefully flip the tabs on the motherboard that secure the ribbon cable to the motherboard and disconnect.

    편집

  6. Garmin Nuvi 260W Circuit Board Replacement: 5 단계, 이미지 1/1

    • Once the body of the nüvi is separated and the ribbon cable is disconnected, remove the three 1.6mm Phillips #0 screws.

    편집

  7. Garmin Nuvi 260W Circuit Board Replacement: 6 단계, 이미지 1/1

    • Carefully disconnect the two cables connecting the battery to the motherboard and remove motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Hunter Johnson

회원 가입일: 03/27/18

327 평판

안내서 2개 작성하였습니다

배지: 6

배지 +3개 더

팀

IUPUI, Team S3-G5, Harley Spring 2018 IUPUI, Team S3-G5, Harley Spring 2018 회원

IUPUI-HARLEY-S18S3G5

3 회원들

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 13

전체 시간: 439