주요 콘텐츠로 건너뛰기

소개

This guide will teach you step by step how to replace your speaker.

  1. Before you begin make sure to turn off your GPS.
    • Before you begin make sure to turn off your GPS.

    • Using your T-6 Torx Screwdriver, unscrew the ten 2.38 mm torx T-6 screws from the back of your GPS.

  2. Using the biggest plastic opening tool, pry open the GPS from the sides. You should now be able to see everything inside the GPS. Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily. Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily.
    • Using the biggest plastic opening tool, pry open the GPS from the sides. You should now be able to see everything inside the GPS.

    • Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Locate the speaker's wire connector plugged into the motherboard. Now delicately detach the speaker connector by pulling directly up.
    • Locate the speaker's wire connector plugged into the motherboard. Now delicately detach the speaker connector by pulling directly up.

  5. Now using the nylon or metal spudger, carefully pry the glue away from the sides of the speaker.
    • Now using the nylon or metal spudger, carefully pry the glue away from the sides of the speaker.

    • The speaker has been attached with strong glue so you will need to use a little bit of force when prying it out. Also be careful while using the nylon or metal spudger so you don't get hurt and the device doesn't get damaged.

  6. Now using the plastic opening tool, pry the speaker up from one of the sides. Your speaker will completely come out of the device. Now using the plastic opening tool, pry the speaker up from one of the sides. Your speaker will completely come out of the device.
    • Now using the plastic opening tool, pry the speaker up from one of the sides. Your speaker will completely come out of the device.

결론

To reassemble your device, follow these instructions in reverse order.

Wanda Martinez

회원 가입일: 2015년 10월 13일

212 평판

안내서 1개 작성함

Sam Houston State, Team 2-6, Blackburne Fall 2015 Sam Houston State, Team 2-6, Blackburne Fall 2015 회원

SHSU-BLACKBURNE-F15S2G6

3 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 182