소개

In this guide the repairer replaces the microphone by disassembling the device to access the motherboard.

Prerequisite Guide:

Disassembling Garmin Nuvi 370 Into Core Components

Tools Used:

  • Fine Point Tweezers
  • Spudger

Estimated Duration: 10 minutes

부품

부품은 필요하지 않습니다.

  1. After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.
    • After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.

    댓글 쓰기

  2. Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.
    • Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • The motherboard will now freely separate from the back casing; lay it flat next to the housing.

    댓글 쓰기

    • Disconnect the speaker and battery from their terminals on the motherboard. This should disconnect the motherboard completely from the back panel.

      • This step is optional but is recommended as it will create more room to work.

      • It is recommended that you use tweezers or the spudger for precision.

    댓글 쓰기

    • Gently pull out the microphone wire from the terminal. Tweezers are recommended for precision.

    댓글 쓰기

    • The microphone component should now be completely separated from the motherboard.

    • Plug in new, functional microphone component.

    댓글 쓰기

결승점

Matt West

회원 가입일: 2013년 04월 18일

22 평판

안내서 4개 작성하였습니다

Cal Poly, Team 13-65, Johann Spring 2013 Cal Poly, Team 13-65, Johann Spring 2013 회원

CPSU-JOHANN-S13S13G65

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 329