기기를 수리하세요 커뮤니티 상점

Garmin Nuvi 50LM Speaker Replacement

소개

This guide instructs how to replace a faulty speaker.

필요한 것

  1. Garmin Nuvi 50LM Speaker Replacement, Speaker Replacement: 1 단계, 이미지 1/1

    • Place the LCD screen is face down on a flat surface.

    • Make sure the side containing the speaker and the charging port is facing up.

    번역하기

  2. Garmin Nuvi 50LM Speaker Replacement: 2 단계, 이미지 1/3 Garmin Nuvi 50LM Speaker Replacement: 2 단계, 이미지 2/3 Garmin Nuvi 50LM Speaker Replacement: 2 단계, 이미지 3/3

    • Remove the four 9 mm screws on the back of the GPS unit using the Torx T-4 screwdriver found in the iFixit Pro Tech Tool Kit.

    번역하기

  4. Garmin Nuvi 50LM Speaker Replacement: 3 단계, 이미지 1/3 Garmin Nuvi 50LM Speaker Replacement: 3 단계, 이미지 2/3 Garmin Nuvi 50LM Speaker Replacement: 3 단계, 이미지 3/3

    • Gently pry open the device with the iFixit Plastic Opening Tool found in the iFixit Pro Tech Tool Kit.

    • Be careful not to damage the orange ribbon cable and the motherboard.

    번역하기

  5. Garmin Nuvi 50LM Speaker Replacement: 4 단계, 이미지 1/3 Garmin Nuvi 50LM Speaker Replacement: 4 단계, 이미지 2/3 Garmin Nuvi 50LM Speaker Replacement: 4 단계, 이미지 3/3

    • Once the GPS is open, identify the black and blue wires connecting the black speaker to the green motherboard.

    • The black wire is located closest to the speaker.

    • The blue wire is located farthest from the speaker.

    번역하기

  6. Garmin Nuvi 50LM Speaker Replacement: 5 단계, 이미지 1/3 Garmin Nuvi 50LM Speaker Replacement: 5 단계, 이미지 2/3 Garmin Nuvi 50LM Speaker Replacement: 5 단계, 이미지 3/3

    • Cut both wires using a pair of wire cutters.

    번역하기

  7. Garmin Nuvi 50LM Speaker Replacement: 6 단계, 이미지 1/2 Garmin Nuvi 50LM Speaker Replacement: 6 단계, 이미지 2/2

    • Solder the wires of the replacement speaker back onto the small silver squares located on the motherboard using the iFixit Soldering Station.

    • Be careful when using the soldering iron, the temperature can reach 600F.

    • Solder the black wire onto the motherboard on the port closest to the speaker and solder the blue wire onto the motherboard on the port farthest from the speaker.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Maurice Thomas

회원 가입일: 10/13/15

661 평판

안내서 5개 작성하였습니다

배지: 11

배지 +8개 더

팀

Sam Houston State, Team 2-7, Blackburne Fall 2015 Sam Houston State, Team 2-7, Blackburne Fall 2015 회원

SHSU-BLACKBURNE-F15S2G7

4 회원들

안내서 5개 작성하였습니다

댓글 한 개

Where would you get the replacement speakers??

abby dog - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 11

전체 시간: 2,573