주요 콘텐츠로 건너뛰기

Garmin StreetPilot c320 Rear Case Assembly Replacement

필요한 것

  1. Garmin StreetPilot c320 Rear Case Assembly Replacement, Rear Case Assembly: 1 단계, 이미지 1/2 Garmin StreetPilot c320 Rear Case Assembly Replacement, Rear Case Assembly: 1 단계, 이미지 2/2
    • Wedge a plastic opening tool in between the outer frame and the rear panel assembly.

    • Pry the outer frame off the perimeter of the rear panel assembly.

    • The cover will easily pop off.

  2. Garmin StreetPilot c320 Rear Case Assembly Replacement: 2 단계, 이미지 1/2 Garmin StreetPilot c320 Rear Case Assembly Replacement: 2 단계, 이미지 2/2
    • Remove the four #00 Phillips screws securing the front case assembly to the rear case assembly.

    • Carefully lift, but do not completely separate, the front case assembly from the rear case assembly.

    • Be extremely cautious when separating both halves, as the rear case assembly is still attached to the front case assembly via a few connectors.

  3. Garmin StreetPilot c320 Rear Case Assembly Replacement: 3 단계, 이미지 1/1
    • Gently pull the battery cable connector from its socket on the motherboard.

    • The second connector can remain attached to the motherboard, but be careful not to break the connector while handling both halves of the device.

결론

To reassemble your device, follow these instructions in reverse order.

Andrew Burman

회원 가입일: 01/18/12

1 평판

안내서 1개 작성함

Cal Poly, Team 11-19, Maness Winter 2012 Cal Poly, Team 11-19, Maness Winter 2012 회원

CPSU-MANESS-W12S11G19

4 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 1,369