주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Garmin StreetPilot c330 Battery Replacement

필요한 것

  1. Garmin StreetPilot c330 Battery Replacement, Outer Casing: 1 단계, 이미지 1/3 Garmin StreetPilot c330 Battery Replacement, Outer Casing: 1 단계, 이미지 2/3 Garmin StreetPilot c330 Battery Replacement, Outer Casing: 1 단계, 이미지 3/3
    • At the top of the outer frame, insert the plastic spudger into the groove in the center.

    • Lever the frame gently until it pops out of the case.

  2. Garmin StreetPilot c330 Battery Replacement: 2 단계, 이미지 1/3 Garmin StreetPilot c330 Battery Replacement: 2 단계, 이미지 2/3 Garmin StreetPilot c330 Battery Replacement: 2 단계, 이미지 3/3
    • Use a Phillips #00 screwdriver to remove the four screws around the screen.

  3. Garmin StreetPilot c330 Battery Replacement: 3 단계, 이미지 1/2 Garmin StreetPilot c330 Battery Replacement: 3 단계, 이미지 2/2
    • Gently pull from both ends of the casing to separate the front and back panels.

    • Do not force the pieces apart wider than the length of the connecting wires, or you will damage the wiring.

  4. Garmin StreetPilot c330 Battery Replacement: 4 단계, 이미지 1/3 Garmin StreetPilot c330 Battery Replacement: 4 단계, 이미지 2/3 Garmin StreetPilot c330 Battery Replacement: 4 단계, 이미지 3/3
    • Gently unplug the white cable connector using either your fingers or tweezers.

  5. Garmin StreetPilot c330 Battery Replacement: 5 단계, 이미지 1/1
    • Carefully expose both halves of the device.

    • Be sure not to pull the two halves apart further than the black wire can reach.

  6. Garmin StreetPilot c330 Battery Replacement, Battery: 6 단계, 이미지 1/3 Garmin StreetPilot c330 Battery Replacement, Battery: 6 단계, 이미지 2/3 Garmin StreetPilot c330 Battery Replacement, Battery: 6 단계, 이미지 3/3
    • Locate the battery bracket and two screws.

    • Remove both screws.

  7. Garmin StreetPilot c330 Battery Replacement: 7 단계, 이미지 1/3 Garmin StreetPilot c330 Battery Replacement: 7 단계, 이미지 2/3 Garmin StreetPilot c330 Battery Replacement: 7 단계, 이미지 3/3
    • Carefully peel the metal bracket away from battery.

    • Pull the battery away from back cover.

    • You may need to use a soldering iron and tongs to remove battery from the speakers.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Adrian Leon

회원 가입일: 10/07/10

173 평판

안내서 3개 작성하였습니다

Cal Poly, Team 22-1, Maness Fall 2010 Cal Poly, Team 22-1, Maness Fall 2010 회원

CPSU-MANESS-F10S22G1

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 7

전체 시간: 4,573