기기를 수리하세요 커뮤니티 상점

Garmin Vivoactive HR Display Replacement

소개

This guide uses the iOpener and black spudger to remove the broken screen from the device, allowing for replacement. Screen replacement will compromise waterproof integrity.

필요한 것

  1. Garmin Vivoactive HR Display Replacement, Display: 1 단계, 이미지 1/1

    • Apply the Heated iOpener to the display for 30 seconds to soften the adhesive..

    편집

  2. Garmin Vivoactive HR Display Replacement: 2 단계, 이미지 1/1

    • Insert a spudger between the display and watch body.

    • Pry upwards and work the spudger around the perimeter of the display to free it from the body.

    • The display is still attached with ribbon cables so don't remove completely.

    편집

  4. Garmin Vivoactive HR Display Replacement: 3 단계, 이미지 1/1

    • Lift the touchscreen to expose ribbon cables that connect it to the main circuit board.

    편집

  5. Garmin Vivoactive HR Display Replacement: 4 단계, 이미지 1/2 Garmin Vivoactive HR Display Replacement: 4 단계, 이미지 2/2

    • Use the flat end of a spudger to disconnect the display cable press connectors from the motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 16명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Chris Corry

회원 가입일: 07/05/18

256 평판

안내서 1개 작성함

배지: 8

배지 +5개 더

팀

IUPUI, Team S2-G5, Harley Summer 2018 IUPUI, Team S2-G5, Harley Summer 2018 회원

IUPUI-HARLEY-SU18S2G5

3 회원들

안내서 3개 작성하였습니다

댓글 19개

Hello,

thanks for this. Where can i buy the new screen?

Bowland Olan - 답글

Nice guide! Thanks. But I can’t find any parts to repair my watch

Christoph Freydank - 답글

Yeah, where can we get the parts from? Also how hard is it to change the battery? Thanks for your help :)

Rick - 답글

What type of glue i use to connect the display an the body?

culibrkboj - 답글

I’ve only found a couple sources for the adhesive.

https://www.ebay.com/itm/New-Adhesive-Do...

https://www.smitacn.com/double-sided-tap...

Matthew Lazarowitz -

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 31

30일 전: 103

전체 시간: 25,736