주요 콘텐츠로 건너뛰기

소개

The Gateway 600 YG2 includes a full-sized 86-key keyboard. Each key performs a specific function when pressed individually or in combination with other keys.

Follow the steps in this guide to replace your keyboard if necessary.

New or pre-owned keyboards can be purchased on eBay. An original factor laptop full complete keyboard with a 2-year protection plan can be purchased for $14.99.

Source: Keyboard Area - Gateway 600Y G2 User Manual

부품

지정된 부품이 없습니다.

  1. Flip the laptop over. Slide the battery release tab to the right.
    • Flip the laptop over. Slide the battery release tab to the right.

  2. Lift the battery out.
    • Lift the battery out.

  3. Insert the spudger between the "sysrq" and "ins" keys.
    • Insert the spudger between the "sysrq" and "ins" keys.

    • Gently lift the power button panel from the right to left.

  4. Remove the 5 screws holding the keyboard in place.
    • Remove the 5 screws holding the keyboard in place.

  5. Potential for device damage: When lifting the keyboard out, do not lift the keyboard up. Only fold back along the space bar edge. Potential for device damage: Do not pull the black cable by the ribbon section. Only pull it from the connector itself.
    • Potential for device damage: When lifting the keyboard out, do not lift the keyboard up. Only fold back along the space bar edge.

    • Potential for device damage: Do not pull the black cable by the ribbon section. Only pull it from the connector itself.

    • Follow the black ribbon cable to the connector and gently pull straight up.

결론

To reassemble your device, follow these instructions in reverse order.

Elizabeth Mazer

회원 가입일: 2010년 10월 14일

78 평판

안내서 10개 작성하였습니다

Cal Poly, Team 20-10, Maness Fall 2010 Cal Poly, Team 20-10, Maness Fall 2010 회원

CPSU-MANESS-F10S20G10

3 회원들

안내서 22개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 1,298