물건을 수리하세요 커뮤니티 상점

Gateway GWTC116-2BL Daughterboard Replacement

소개

If your Gateway GWTC116-2BL laptop is experiencing issues with its daughterboard, replacing it might be necessary. The daughterboard is an essential component that connects the motherboard to other peripherals, such as the keyboard, touchpad, and USB ports. Faulty daughterboards can cause several problems, including malfunctioning laptop peripherals. Replacing a Gateway GWTC116-2BL daughterboard is a simple process that involves a few steps. In this guide, we'll outline the steps you need to take to replace the daughterboard and get your laptop functioning normally again.

필요한 것

  1. Gateway GWTC116-2BL Daughterboard Replacement, Back Panel: 1 단계, 이미지 1개 중 1개

    • Ground yourself before disassembling and handling the computer.

    • Remove the ten 3.0 mm Phillips #00 screws from the back panel of the laptop.

    번역하기

  2. Gateway GWTC116-2BL Daughterboard Replacement: 2 단계, 이미지 2개 중 1개 Gateway GWTC116-2BL Daughterboard Replacement: 2 단계, 이미지 2개 중 2개

    • Use the spudger to pry the back panel away from the body of the laptop.

    번역하기

  3. Gateway GWTC116-2BL Daughterboard Replacement, Battery: 3 단계, 이미지 1개 중 1개

    • Remove the five 3.0 mm Phillips #00 screws.

    번역하기

  5. Gateway GWTC116-2BL Daughterboard Replacement: 4 단계, 이미지 2개 중 1개 Gateway GWTC116-2BL Daughterboard Replacement: 4 단계, 이미지 2개 중 2개

    • Using your fingers, flick open the battery connector bracket.

    • Remove the connector from bracket.

    번역하기

  6. Gateway GWTC116-2BL Daughterboard Replacement: 5 단계, 이미지 1개 중 1개

    • Pull up the battery to remove from the base.

    번역하기

  7. Gateway GWTC116-2BL Daughterboard Replacement, Daughterboard: 6 단계, 이미지 2개 중 1개 Gateway GWTC116-2BL Daughterboard Replacement, Daughterboard: 6 단계, 이미지 2개 중 2개

    • Peel off the yellow piece of tape that is placed over the daughterboard.

    번역하기

  8. Gateway GWTC116-2BL Daughterboard Replacement: 7 단계, 이미지 1개 중 1개

    • Remove the three 3.0 mm Phillips #00 screws.

    번역하기

  9. Gateway GWTC116-2BL Daughterboard Replacement: 8 단계, 이미지 2개 중 1개 Gateway GWTC116-2BL Daughterboard Replacement: 8 단계, 이미지 2개 중 2개

    • Flick open the bracket that connects the motherboard and daughterboard.

    • Remove the connector strip.

    번역하기

  10. Gateway GWTC116-2BL Daughterboard Replacement: 9 단계, 이미지 1개 중 1개

    • Remove the daughterboard from the base of the computer.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

3다른 기여자 명과 함께

Kailey Sousa

회원 가입일: 03/22/24

513 평판

안내서 4개를 작성함

배지: 7

배지 +4개 더

팀

UMass Dartmouth, Team 6-2, Botvin Spring 2024 UMass Dartmouth, Team 6-2, Botvin Spring 2024 회원

UMASSD-BOTVIN-S24S6G2

3 회원들

안내서 5개를 작성함

댓글 0개

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 5

지난 30일: 11

전체 시간: 184