주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

GoPro Hero Casing Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. GoPro Hero Casing Replacement, Casing: 1 단계, 이미지 1/1
    • Power off your GoPro before beginning disassembly.

    • Unclip the black latch to the camera case and open the case.

  2. GoPro Hero Casing Replacement: 2 단계, 이미지 1/1
    • Gently pry the back open by inserting a metal spudger between the case and back panel.

  3. GoPro Hero Casing Replacement: 3 단계, 이미지 1/1
    • Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

  4. GoPro Hero Casing Replacement: 4 단계, 이미지 1/1
    • Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

  5. GoPro Hero Casing Replacement: 5 단계, 이미지 1/1
    • Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.

    • Make sure to keep track of these screws as they are very small.

  6. GoPro Hero Casing Replacement: 6 단계, 이미지 1/1
    • Carefully remove the motherboard and white plastic piece from the case.

결론

To reassemble your device, follow these instructions in reverse order.

River Drake

회원 가입일: 04/02/15

1,023 평판

안내서 5개 작성하였습니다

Cal Poly, Team 12-2, Lancaster Spring 2015 Cal Poly, Team 12-2, Lancaster Spring 2015 회원

CPSU-LANCASTER-S15S12G2

4 회원들

안내서 18개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 124