기기를 수리하세요 커뮤니티 상점

GoPro Karma Harness Replacement

소개

Replacing the harness for the GoPro camera is fairly easy. We will tell you how to remove the stabilizer which holds the harness, how to remove camera from the harness, and how to replace the harness itself.

필요한 것

  1. GoPro Karma Harness Replacement, Stabilizer: 1 단계, 이미지 1/3 GoPro Karma Harness Replacement, Stabilizer: 1 단계, 이미지 2/3 GoPro Karma Harness Replacement, Stabilizer: 1 단계, 이미지 3/3

    • Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.

    • Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.

    편집

  2. GoPro Karma Harness Replacement: 2 단계, 이미지 1/1

    • Remove the stabilizer by pulling the entire stabilizer out of the drone body.

    편집

  4. GoPro Karma Harness Replacement, Harness: 3 단계, 이미지 1/3 GoPro Karma Harness Replacement, Harness: 3 단계, 이미지 2/3 GoPro Karma Harness Replacement, Harness: 3 단계, 이미지 3/3

    • Place finger on the tab to open the harness and remove the camera.

    • Be sure to pull the camera straight out lest you damage the connectors.

    편집

  5. GoPro Karma Harness Replacement: 4 단계, 이미지 1/1

    • Using a Hex 2.0mm screwdriver, remove the two 12 mm hex screws closest to the harness.

    편집

  6. GoPro Karma Harness Replacement: 5 단계, 이미지 1/3 GoPro Karma Harness Replacement: 5 단계, 이미지 2/3 GoPro Karma Harness Replacement: 5 단계, 이미지 3/3

    • Pull the harness off of the stabilizer.

    • Be sure to pull the harness straight off lest you damage the connector.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Max Verspieren

회원 가입일: 04/19/18

97 평판

안내서 1개 작성함

배지: 3

팀

Cal Poly, Team S25-G14, Maness Spring 2018 Cal Poly, Team S25-G14, Maness Spring 2018 회원

CPSU-MANESS-S18S25G14

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 9

30일 전: 17

전체 시간: 1,190