기기를 수리하세요 커뮤니티 상점

Graco Secure Coverage Nursery Unit Power Jack Replacement

소개

Use this guide to replace the power jack on your Graco Secure Coverage Digital Baby Monitor for nursery unit.

The power jack replacement includes the power jack and battery replacement.

필요한 것

  1. Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Battery: 1 단계, 이미지 1/3 Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Battery: 1 단계, 이미지 2/3 Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Battery: 1 단계, 이미지 3/3

    • Remove the 9mm screw from the battery cover of the nursery unit using a Phillips #1 tip screwdriver.

    번역하기

  2. Graco Secure Coverage Nursery Unit Power Jack Replacement: 2 단계, 이미지 1/2 Graco Secure Coverage Nursery Unit Power Jack Replacement: 2 단계, 이미지 2/2

    • Using the plastic opening tool, pry and remove the battery cover carefully.

    • Remove the batteries using plastic opening tool.

    • Replace the batteries.

    번역하기

  3. Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Power Jack: 3 단계, 이미지 1/2 Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Power Jack: 3 단계, 이미지 2/2

    • Remove the two 9mm Phillips #1 screws from the rare case of the device.

    • Place the screws in a secure place.

    번역하기

  5. Graco Secure Coverage Nursery Unit Power Jack Replacement: 4 단계, 이미지 1/1

    • Hold the bottom of the device with one hand and pull down to separate the front and rare cases.

    • While holding the device with one hand, use plastic opening tool to pry the edges of the front case away from the back case.

    • Take your time and apply constant force carefully to avoid breaking any other plastic parts from the device.

    번역하기

  6. Graco Secure Coverage Nursery Unit Power Jack Replacement: 5 단계, 이미지 1/2 Graco Secure Coverage Nursery Unit Power Jack Replacement: 5 단계, 이미지 2/2

    • Remove all three 7mm Phillips #1 screws from the mother board.

    • Make sure you gently unscrew the screws with moderate force and light pressure to avoid any damages.

    번역하기

  7. Graco Secure Coverage Nursery Unit Power Jack Replacement: 6 단계, 이미지 1/2 Graco Secure Coverage Nursery Unit Power Jack Replacement: 6 단계, 이미지 2/2

    • Pick up the mother board carefully.

    • Using plastic opening tool, gently pry the power jack plastic part and separate it away from the device case.

    • Apply constant force to avoid breaking the plastic part.

    번역하기

  8. Graco Secure Coverage Nursery Unit Power Jack Replacement: 7 단계, 이미지 1/1

    • Solder off the wires from the mother board.

    • There are many pins attached to the mother board, make sure you solder off the proper pins that attached to the power jack wires.

    • Replace the power jack.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Omar Abdullah

회원 가입일: 09/06/15

201 평판

안내서 2개 작성하였습니다

배지: 6

배지 +3개 더

팀

USF Tampa, Team 6-5, Remmell Fall 2015 USF Tampa, Team 6-5, Remmell Fall 2015 회원

USFT-REMMELL-F15S6G5

4 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 132