기기를 수리하세요 커뮤니티 상점

Grundig TK125 Transport Belts Replacement

소개

These 6 steps explain to remove bottom and top covers.. at the bottom side remove the plate (2 screws) which hold the flywheel axle.. this is your opening to replace the 2 belts, forst the biggest belt for the flywheel, the the midsize belt for the drive.. all good..

  1. Grundig TK125 Transport Belts Replacement, Transport Belts: 1 단계, 이미지 1/2 Grundig TK125 Transport Belts Replacement, Transport Belts: 1 단계, 이미지 2/2

    • I have ordered a new belt set on aliepxress, to be continued once i received them

    편집

  2. Grundig TK125 Transport Belts Replacement: 2 단계, 이미지 1/1

    • These are the 3 belts needed (if all) for the TK125, the biggest is needed for the flywheel, the midsize of for the drive and the smallest of for the counter.

    편집

  4. Grundig TK125 Transport Belts Replacement: 3 단계, 이미지 1/2 Grundig TK125 Transport Belts Replacement: 3 단계, 이미지 2/2

    • Now remove the bottom and the top covers so you can reach both sides of the recorder

    편집

  5. Grundig TK125 Transport Belts Replacement: 4 단계, 이미지 1/2 Grundig TK125 Transport Belts Replacement: 4 단계, 이미지 2/2

    • Remove the flywheel axle restplate, here is your opening to replace both the belts

    편집

  6. Grundig TK125 Transport Belts Replacement: 5 단계, 이미지 1/1

    • first you place the large flywheel belt, then you place the midsize belt for the drive

    편집

  7. Grundig TK125 Transport Belts Replacement: 6 단계, 이미지 1/1

    • this is the small belt for the counter

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Joenymus

회원 가입일: 03/09/24

148 평판

안내서 1개 작성함

배지: 3

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 15