주요 콘텐츠로 건너뛰기

소개

The back panel is attached to the rest of the device by internal clips. In this guide you will separate these clips with the smallest plastic opening tool. This guide requires prying plastic pieces apart, please be gentle and use plastic tools.

부품

지정된 부품이 없습니다.

  1. Identify the SD card port.
    • Identify the SD card port.

  2. Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.
    • Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.

    • Do not insert opening tool too far. Avoid making contact with the metal inside the port.

  3. Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.
    • Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.

  4. Separate the back panel from the rest of the device.
    • Separate the back panel from the rest of the device.

결론

To reassemble your device, follow these instructions in reverse order.

Bryce Harmsen

회원 가입일: 2018년 09월 25일

593 평판

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 122