기기를 수리하세요 커뮤니티 상점

HP 10 2101 Camera Replacement

소개

The cameras are directly attached to the motherboard through web cam cables. In order to access those cables to remove the cameras, the battery must be removed first. This guide also requires unsoldering the battery connections from the motherboard.

필요한 것

  1. HP 10 2101 Camera Replacement, Back Panel: 1 단계, 이미지 1/1

    • Identify the SD card port.

    편집

  2. HP 10 2101 Camera Replacement: 2 단계, 이미지 1/1

    • Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.

    • Do not insert opening tool too far. Avoid making contact with the metal inside the port.

    편집

  3. HP 10 2101 Camera Replacement: 3 단계, 이미지 1/1

    • Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.

    편집

  4. HP 10 2101 Camera Replacement: 4 단계, 이미지 1/1

    • Separate the back panel from the rest of the device.

    편집

  6. HP 10 2101 Camera Replacement, Battery: 5 단계, 이미지 1/1

    • Desolder the battery connectors from the motherboard.

    편집

  7. HP 10 2101 Camera Replacement: 6 단계, 이미지 1/1

    • Pull the bright blue-green tabs to remove the battery from the rest of the device.

    • Pulling the tabs may not fully disconnect the battery from the metal display casing.

    편집

  8. HP 10 2101 Camera Replacement: 7 단계, 이미지 1/2 HP 10 2101 Camera Replacement: 7 단계, 이미지 2/2

    • If the previous step is unsuccessful, wedge the smallest plastic opening tool between the adhesive and the metal display casing.

    • Wedging may apply unsafe pressure on the battery. Be careful not to puncture the battery.

    편집

  9. HP 10 2101 Camera Replacement, Camera: 8 단계, 이미지 1/1

    • Peel off the metal mesh tape with the plastic opening tool.

    편집

  10. HP 10 2101 Camera Replacement: 9 단계, 이미지 1/1

    • Disconnect the zero insertion force (ZIF) cable. Use the tip of the spudger or your fingernail to flip up the small white locking flap. Then, you can safely pull the cable out.

    • Repeat this process for the second connection port.

    • Be sure to pry up on the hinged flap, not the connector socket.

    편집

  11. HP 10 2101 Camera Replacement: 10 단계, 이미지 1/1

    • Remove the front and back camera.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Bryce Harmsen

회원 가입일: 09/25/18

668 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

Central Washington University, Team S1-G4, Pengilly Fall 2018 Central Washington University, Team S1-G4, Pengilly Fall 2018 회원

CWU-PENGILLY-F18S1G4

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 145