기기를 수리하세요 커뮤니티 상점

HP 15-ay103dx Motherboard Replacement

필요한 것

  1. HP 15-ay103dx Motherboard Replacement, Battery: 1 단계, 이미지 1/1

    • Slide the two battery lock latches on the back of the device to the “unlock” position.

    번역하기

  2. HP 15-ay103dx Motherboard Replacement: 2 단계, 이미지 1/1

    • Lift the battery upward to remove it from the device.

    번역하기

  3. HP 15-ay103dx Motherboard Replacement, Back Panel: 3 단계, 이미지 1/1

    • Using the PH1 phillips-head screwdriver, remove all the 5/16 in. screws from the back of the device.

    • There should be 10 in total, be sure to keep them together!

    번역하기

  4. HP 15-ay103dx Motherboard Replacement: 4 단계, 이미지 1/1

    • Locate the optical disc drive and remove it from the device by sliding it straight of the device.

    번역하기

  6. HP 15-ay103dx Motherboard Replacement: 5 단계, 이미지 1/2 HP 15-ay103dx Motherboard Replacement: 5 단계, 이미지 2/2

    • Covering the hinges of the device are rubber bumpers secured to the device using adhesive. Remove them carefully.

    • Place the adhesive side up as you will need to place them back after your replacement is complete.

    번역하기

  7. HP 15-ay103dx Motherboard Replacement: 6 단계, 이미지 1/2 HP 15-ay103dx Motherboard Replacement: 6 단계, 이미지 2/2

    • In the same spot you’ve just removed the bumpers from, you will find two 5/16 in. screws. Using the same Phillips-head screwdriver used in step 2, remove the screws

    • Be sure to keep the screws together!

    번역하기

  8. HP 15-ay103dx Motherboard Replacement: 7 단계, 이미지 1/1

    • Carefully remove the back panel from the device.

    • If you are unable to do this with your hands, you can use a thin prying tool of your choice to make it easier!

    번역하기

  9. HP 15-ay103dx Motherboard Replacement, Motherboard: 8 단계, 이미지 1/3 HP 15-ay103dx Motherboard Replacement, Motherboard: 8 단계, 이미지 2/3 HP 15-ay103dx Motherboard Replacement, Motherboard: 8 단계, 이미지 3/3

    • Disconnect the wires around the motherboard securing it to the device.

    • To do this, flip the black "switches" securing the wires into place upwards.

    번역하기

  10. HP 15-ay103dx Motherboard Replacement: 9 단계, 이미지 1/1

    • Remove the six 5/16 in. screws holding the motherboard onto the device using the P1 philips-head screwdriver.

    • Be sure to keep them together!

    번역하기

  11. HP 15-ay103dx Motherboard Replacement: 10 단계, 이미지 1/3 HP 15-ay103dx Motherboard Replacement: 10 단계, 이미지 2/3 HP 15-ay103dx Motherboard Replacement: 10 단계, 이미지 3/3

    • Disconnect the wire securing the whole motherboard located at the top to the motherboard.

    • This is possible with your fingers, but is easier to do using an iFixit opening tool.

    번역하기

  12. HP 15-ay103dx Motherboard Replacement: 11 단계, 이미지 1/1

    • Carefully lift the motherboard to remove it from the device.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Rafael Cardona Bautista

회원 가입일: 09/25/17

104 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

University of North Texas, Team S3-G3, Thompson Fall 2017 University of North Texas, Team S3-G3, Thompson Fall 2017 회원

UNT-THOMPSON-F17S3G3

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 10

전체 시간: 1,612