주요 콘텐츠로 건너뛰기

HP 15-da0002dx Back Cover Replacement

필요한 것

  1. HP 15-da0002dx Back Cover Replacement, Back Cover: 1 단계, 이미지 1/1
    • Make sure the computer is completely turned off.

  2. HP 15-da0002dx Back Cover Replacement: 2 단계, 이미지 1/1
    • Turn over the laptop.

    • The HP label should be touching the table and the bottom cover should be facing up.

  3. HP 15-da0002dx Back Cover Replacement: 3 단계, 이미지 1/2 HP 15-da0002dx Back Cover Replacement: 3 단계, 이미지 2/2
    • Two plastic feet are located on adjacent sides of the back cover.

    • Peel back the plastic feet using the plastic opening tools.

  4. HP 15-da0002dx Back Cover Replacement: 4 단계, 이미지 1/1
    • Using the Phillips #1 screwdriver, unscrew the eleven 9.0 mm screws holding the back cover in place.

  5. HP 15-da0002dx Back Cover Replacement: 5 단계, 이미지 1/1
    • Carefully flip over the computer so the HP label is now facing the ceiling.

  6. HP 15-da0002dx Back Cover Replacement: 6 단계, 이미지 1/2 HP 15-da0002dx Back Cover Replacement: 6 단계, 이미지 2/2
    • Open the screen.

    • Run the plastic opening tools along the edge of the back cover. Do this until the back cover becomes loose.

  7. HP 15-da0002dx Back Cover Replacement: 7 단계, 이미지 1/1
    • Close the screen and flip over the laptop. Using the plastic opening tools, gently take off the back cover starting from the middle, bottom edge.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Abigail Aron

회원 가입일: 09/04/19

914 평판

안내서 5개 작성하였습니다

University of Alabama, Team S2-G8, Bedsole Fall 2019 University of Alabama, Team S2-G8, Bedsole Fall 2019 회원

UA-BEDSOLE-F19S2G8

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 24

30일 전: 75

전체 시간: 5,888