주요 콘텐츠로 건너뛰기

HP 17-bs049dx Fan Replacement

필요한 것

  1. HP 17-bs049dx Fan Replacement, Battery: 1 단계, 이미지 1/1
    • To remove the battery, simply push the tabs towards each other.

    • The battery will come out with force, be sure to keep anything fragile away from the laptop during this process.

  2. HP 17-bs049dx Fan Replacement, Back Panel: 2 단계, 이미지 1/1
    • Remove the four screws (13.7mm) with a Phillips #0 screwdriver.

    • Be sure to lift all four rubber tabs to access screws (7.51mm) underneath.

    • Rubber tabs will require force to access screws.

  3. HP 17-bs049dx Fan Replacement: 3 단계, 이미지 1/1
    • Use the Philips 0 screwdriver to unscrew the screws (7.51mm) that were underneath the battery.

  4. HP 17-bs049dx Fan Replacement: 4 단계, 이미지 1/2 HP 17-bs049dx Fan Replacement: 4 단계, 이미지 2/2
    • Pull outwards on the disk reader to remove from main frame.

    • This removal will require force.

    • All screws must be removed before removing disk reader.

  5. HP 17-bs049dx Fan Replacement: 5 단계, 이미지 1/1
    • Lift back panel to access internal components.

    • You will need to use force to pry it open.

  6. HP 17-bs049dx Fan Replacement, Fan: 6 단계, 이미지 1/3 HP 17-bs049dx Fan Replacement, Fan: 6 단계, 이미지 2/3 HP 17-bs049dx Fan Replacement, Fan: 6 단계, 이미지 3/3
    • Unscrew all four screws connecting the heatsink to the motherboard.

    • The screws holding the heat sink will not detach from the heat sink.

    • All four screws must be loosened before removing the heat sink.

    • After loosening all screws remove the heat sink and store it in a safe place.

  7. HP 17-bs049dx Fan Replacement: 7 단계, 이미지 1/1
    • After removing the heat sink, disconnect the cable connecting the fan to the motherboard.

  8. HP 17-bs049dx Fan Replacement: 8 단계, 이미지 1/1
    • Remove the old fan from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Juan Seoane-Seri

회원 가입일: 09/24/18

183 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 8

전체 시간: 709