주요 콘텐츠로 건너뛰기

HP 8 1401 Front-Facing Camera Replacement

필요한 것

  1. HP 8 1401 Front-Facing Camera Replacement, Back Panel: 1 단계, 이미지 1/1
    • Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.

  2. HP 8 1401 Front-Facing Camera Replacement: 2 단계, 이미지 1/1
    • Insert the tip of a plastic opening tool in the seam between the front and back panels.

  3. HP 8 1401 Front-Facing Camera Replacement: 3 단계, 이미지 1/2 HP 8 1401 Front-Facing Camera Replacement: 3 단계, 이미지 2/2
    • Slide the plastic opening tool around all edges of the device until the back panel detaches.

    • Lift off the back panel.

  4. HP 8 1401 Front-Facing Camera Replacement, Front-Facing Camera: 4 단계, 이미지 1/1
    • Place the tip of your spudger under the edge of the press fit connector, and pry the connector straight up from its socket.

  5. HP 8 1401 Front-Facing Camera Replacement: 5 단계, 이미지 1/2 HP 8 1401 Front-Facing Camera Replacement: 5 단계, 이미지 2/2
    • Lift the front-facing camera out of the tablet.

  6. HP 8 1401 Front-Facing Camera Replacement: 6 단계, 이미지 1/1
    • After the front-facing camera has been removed, the tablet should look like this.

결론

To reassemble your device, follow these instructions in reverse order.

Katie Presz

회원 가입일: 01/16/19

641 평판

안내서 6개 작성하였습니다

University of Alabama, Team S1-G1, Bedsole Spring 2019 University of Alabama, Team S1-G1, Bedsole Spring 2019 회원

UA-BEDSOLE-S19S1G1

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 123