기기를 수리하세요 커뮤니티 상점

HP Beats Special Edition 15-p390nr Fan Replacement

소개

If you find yourself needing to replace your HP Beats Special Edition 15-p390nr fans, use this guide to help you go through the process successfully.

필요한 것

  1. HP Beats Special Edition 15-p390nr Fan Replacement, Keyboard: 1 단계, 이미지 1/2 HP Beats Special Edition 15-p390nr Fan Replacement, Keyboard: 1 단계, 이미지 2/2

    • Turn computer off before starting.

    • Turn computer over and begin removing noticeable 8mm screws with a Phillips #0 screwdriver.

    편집

  2. HP Beats Special Edition 15-p390nr Fan Replacement: 2 단계, 이미지 1/2 HP Beats Special Edition 15-p390nr Fan Replacement: 2 단계, 이미지 2/2

    • Some screws may be hidden under a screw cover.

    • Simply use a metal spudger to pop off the screw cover to unveil the hidden 8mm screw.

    • Screw cover may fly when removing.

    편집

  3. HP Beats Special Edition 15-p390nr Fan Replacement: 3 단계, 이미지 1/2 HP Beats Special Edition 15-p390nr Fan Replacement: 3 단계, 이미지 2/2

    • Once screws are removed you may now remove the optical drive.

    • Remove the hidden 3mm screw in the optical drive port.

    편집

  4. HP Beats Special Edition 15-p390nr Fan Replacement: 4 단계, 이미지 1/2 HP Beats Special Edition 15-p390nr Fan Replacement: 4 단계, 이미지 2/2

    • Remove the rubberized feet located on the left and right shoulder of the computer to uncover hidden 8mm screws.

    • Popping noises are normal.

    • The shoulder caps are removable. Underneath there are 2 additional screws.

    편집

  5. HP Beats Special Edition 15-p390nr Fan Replacement: 5 단계, 이미지 1/2 HP Beats Special Edition 15-p390nr Fan Replacement: 5 단계, 이미지 2/2

    • Flip computer over and wedge metal spudger along the computer to pop off keyboard panel

    편집

  7. HP Beats Special Edition 15-p390nr Fan Replacement: 6 단계, 이미지 1/2 HP Beats Special Edition 15-p390nr Fan Replacement: 6 단계, 이미지 2/2

    • Unclip wires connected to the motherboard and remove keyboard from the device.

    • 17 screws should be removed up to this point.

    편집

  8. HP Beats Special Edition 15-p390nr Fan Replacement, Motherboard: 7 단계, 이미지 1/1

    • Remove screws from the motherboard.

    • 11 screws should be removed from the motherboard

    편집

  9. HP Beats Special Edition 15-p390nr Fan Replacement: 8 단계, 이미지 1/1

    • Unclamp wire strips from motherboard.

    편집

  10. HP Beats Special Edition 15-p390nr Fan Replacement: 9 단계, 이미지 1/1

    • Detach by lifting the motherboard up and flip the motherboard over.

    편집

  11. HP Beats Special Edition 15-p390nr Fan Replacement: 10 단계, 이미지 1/1

    • Unclip wifi card for further procedures

    편집

  12. HP Beats Special Edition 15-p390nr Fan Replacement, Fan: 11 단계, 이미지 1/1

    • Remove the fan cable from the connector that connects to the motherboard.

    • Pull straight out to avoid damage to connectors.

    편집

  13. HP Beats Special Edition 15-p390nr Fan Replacement: 12 단계, 이미지 1/1

    • Remove all three screws that hold the fan to the system board

    편집

  14. HP Beats Special Edition 15-p390nr Fan Replacement: 13 단계, 이미지 1/1

    • Lift and remove the fan from the top cover.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Evan Rice

회원 가입일: 10/02/18

506 평판

안내서 3개 작성하였습니다

배지: 9

배지 +6개 더

팀

Linn Benton Community College, Team S1-G3, Karnes Fall 2018 Linn Benton Community College, Team S1-G3, Karnes Fall 2018 회원

LBCC-KARNES-F18S1G3

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 13

30일 전: 28

전체 시간: 2,589