주요 콘텐츠로 건너뛰기

소개

Cracked or glitching screens are common for all laptops. This guide will show you how to remove and replace a defective LCD.

  1. Open the laptop. With your the plastic spudger or your fingers, gently peel off the two thin adhesive layers at left and right bottom edges of the screen. Do not pry up the plastic bezel (monitor frame), just the adhesive layer.
    • Open the laptop.

    • With your the plastic spudger or your fingers, gently peel off the two thin adhesive layers at left and right bottom edges of the screen.

    • Do not pry up the plastic bezel (monitor frame), just the adhesive layer.

    • If the adhesive layer isn't coming off, use a metal spudger.

  2. Remove the two 3 mm Phillips #0 screws located underneath the adhesive layers that were removed in the previous step Remove the two 3 mm Phillips #0 screws located underneath the adhesive layers that were removed in the previous step
    • Remove the two 3 mm Phillips #0 screws located underneath the adhesive layers that were removed in the previous step

  3. Gently pry up the plastic bezel with the small, narrow end of the metal spudger. Insert the long, flat end of the metal spudger into the gap. Slide the metal spudger along the edge to disconnect the bezel from the laptop
    • Gently pry up the plastic bezel with the small, narrow end of the metal spudger.

    • Insert the long, flat end of the metal spudger into the gap.

    • Slide the metal spudger along the edge to disconnect the bezel from the laptop

    • You should hear popping sounds as you slide the spudger along the edge.

    • If the spudger gets stuck while sliding, use some extra force.

  4. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  5. Tilt the laptop screen as far back as possible Hold the bezel with both hands and twist up and towards you to disconnect the bottom edge of the bezel from the laptop.
    • Tilt the laptop screen as far back as possible

    • Hold the bezel with both hands and twist up and towards you to disconnect the bottom edge of the bezel from the laptop.

    • You may have to use extra force for this step

  6. Remove the four silver 4 mm Phillips #0 screws at the bottom of the LCD. Remove the four black 3 mm Phillips #00 screws along the perimeter of the LCD. Remove the four black 3 mm Phillips #00 screws along the perimeter of the LCD.
    • Remove the four silver 4 mm Phillips #0 screws at the bottom of the LCD.

    • Remove the four black 3 mm Phillips #00 screws along the perimeter of the LCD.

  7. Lift the LCD off its mount and gently lay it facedown on the keyboard. Lift the LCD off its mount and gently lay it facedown on the keyboard.
    • Lift the LCD off its mount and gently lay it facedown on the keyboard.

  8. Peel off the clear sticker covering the display cable at the base of the LCD. Gently pull the display cable from the connector. Gently pull the display cable from the connector.
    • Peel off the clear sticker covering the display cable at the base of the LCD.

    • Gently pull the display cable from the connector.

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

Jonah Silva

회원 가입일: 2017년 04월 26일

392 평판

안내서 1개 작성함

Cal Poly, Team S23-G5, Livingston Spring 2017 Cal Poly, Team S23-G5, Livingston Spring 2017 회원

CPSU-LIVINGSTON-S17S23G5

3 회원들

안내서 4개 작성하였습니다

Thanks for the great guidance. Easy as pie!

lcowsert - 답글

댓글 쓰기

조회 통계:

지난 24시간: 9

지난 7일: 36

지난 30일: 145

전체 시간: 3,202